Ktenders

Construction & building · North East

CLIFFORD PARK PUMP TRACK

Kingsteignton Town Council · Closes 17:00 on 25 November 2026 · 5 days left

What this tender is

Kingsteignton Town Council is seeking suppliers for “CLIFFORD PARK PUMP TRACK”. It is classed as construction & building works, with delivery in North East.

In the buyer's own words: Kingsteignton Town Council invites competitive tenders from suitably qualified and experienced specialist contractors for the design and construction of a new asphalt pump track at Clifford Park, Kingsteignton, Devon. Pump Track Specification 1. Site Preparation Measure and mark out the area associated with the pump track. 2. Topsoil Topsoil to be set aside for the dressing of the berms etc. 3. Drainage 80mm dia PVC coil pipe to be laid centrally in the trench, covered with a geotextile membrane and backfilled with 40mm clean angular stone. Drainage pipe to be laid to a nearby ditch…

The tender is being run under an open procedure, so any supplier may bid.

The estimated value is £75k, as stated by the buyer; the final value can differ.

Ktenders places each notice in a trade from the classification code the buyer chose and in a region from the delivery location it gives, so if the scope looks different from the trade shown here, the official notice is the one to trust.

Who it suits

This tender is most relevant to construction & building suppliers able to deliver in North East.

At this size it is within reach of many small suppliers, though the buyer may still ask for relevant experience, insurance and financial standing.

Public buyers in the UK must treat suppliers equally and explain how bids will be scored, so the selection and award criteria in the tender documents are the best guide to whether this opportunity is worth your time.

Before deciding to bid, read the full notice and any attached documents: they set out the exact requirements, selection criteria and how bids will be scored.

Key dates

The notice was published on 6 November 2026.

Responses are due by 17:00 UK time on 25 November 2026, which is 5 days from today.

Most buyers set a cut-off for clarification questions a few days before the deadline, and the answers are usually shared with every bidder on the buyer's portal.

Deadlines on public tenders are strict: late submissions are normally rejected, so allow time for clarification questions and for uploading your response on the buyer's portal.

Original notice text

Kingsteignton Town Council invites competitive tenders from suitably qualified and experienced specialist contractors for the design and construction of a new asphalt pump track at Clifford Park, Kingsteignton, Devon.

Pump Track Specification

1. Site Preparation

Measure and mark out the area associated with the pump track.

2. Topsoil

Topsoil to be set aside for the dressing of the berms etc.

3. Drainage

80mm dia PVC coil pipe to be laid centrally in the trench, covered with a geotextile membrane and backfilled with 40mm clean angular stone. Drainage pipe to be laid to a nearby ditch approximately 10 metres from track.

4. Track Sub-Base

Most of the material required for the track construction can be found on site.

5. Track Construction

The track will consist of:-

-

Start ramp, rider waiting zone, no more than 2metres in height at a width of 2meters

-

3 x 180 and 2 x 90-degree berms, 0.8m in height

-

4 rhythm sections 1.8m riding width, consisting of x number of rollers

-

All berms to have entry and exit rollers

-

All berms have a rest platform and also a lower pavement to allow inexperienced riders to ride around the base of the berms on a more level surface.

The track has approximately 100 to 250m of rideable surface depending on the track design.

6. Track Foundation

The track will have a layer of geotextile (1000 gauge) to prevent weed growth followed by a 200mm layer of type one stone compacted to form the foundation.

7. Asphalt

Lay a 6mm specialist pump track specific asphalt wearing course compacted to a 80mm final depth.

The proposed project will provide a recreational facility suitable for a range of ages and abilities.

8. Landscaping

Topsoil to be used to dress the sides of all Berms, Jumps and Start Hill.

Lay turf to all areas associated with the Pump Track.

9. Site Reinstatement

On completion of the track reinstate all areas associated with the contract

10. ROSPA

Provide a full safety report from ROSPA on completion

11. Access Path

The access path will be approximately 10-15 metres in length and run from the access gate by the Royal British Legion Building to the starting ramp of the pump track.

The area of the path to be levelled throughout its length and excess material used in the construction of the pump track. Width of path to be 2 metres.

12. Path Construction

1 Lay a geotextile membrane 1000 gauge

2 Lay a 150mm layer of type 1 stone

3 Lay a fine layer of 10mm to dust stone as the top surface

Fencing: The Council would also like a separate Quote to provide safety fencing around the pump track, including safety meshing. This is to provide a safe environment for the riders and also prevent other park users from accessing inadvertently eg dogs, small children, etc.

The contract is expected to include detailed design, site preparation, associated groundworks, construction of the pump track, appropriate drainage and finishing works, together with any other requirements identified within the Council's tender specification.

Contractors must demonstrate relevant experience in delivering comparable pump track projects and provide a fully costed submission in accordance with the published tender documentation.

The estimated project value is £75,000-£85,000, subject to confirmation of the VAT basis.

The final contract award will be subject to evaluation of submissions and formal approval by Kingsteignton Town Council.

More construction & building tenders

All construction & building tenders →

More tenders in North East

All tenders in North East →

Closing soon

All live tenders by trade →