Ktenders

Construction & building · South West Upcoming

M48 SEVERN CROSSING RESURFACING EXPRESSION OF INTEREST

AMEY OW LIMITED · Expected to open November 2026

What this tender is

AMEY OW LIMITED is seeking suppliers for “M48 SEVERN CROSSING RESURFACING EXPRESSION OF INTEREST”. It is classed as construction & building work, with delivery in South West.

The notice uses CPV code 45233223 (Carriageway resurfacing works), the common classification buyers use across the UK and Europe, which is how Ktenders places it in the construction & building trade.

In the buyer's own words: • Application of the following mastic asphalt product: Permatrack Bridge Surfacing + 40% 4/10mm Agg (MA 10 10/20) with 6mm Pre-coated chippings 68PSV at a rate of spread of 6.0 to 7.5 kg/m2 • Application to achieve a mean thickness of an average of 35mm +/- 2mm locally • Surfacing to achieve the following standard: o Surface regularity taken on 75m lengths, the pavement surface shall be measured transversely for irregularities at 10m intervals by a 3m long straight-edge in accordance with BS8420 placed at right angles to the centre line of the road. The maximum allowable difference between…

The tender is being run under a selective procedure, where the buyer shortlists suppliers before inviting bids.

The estimated value is £30m, as stated by the buyer; the final value can differ.

Ktenders places each notice in a trade from the classification code the buyer chose and in a region from the delivery location it gives, so if the scope looks different from the trade shown here, the official notice is the one to trust.

Who it suits

This tender is most relevant to construction & building suppliers able to deliver in South West.

The buyer has flagged it as suitable for small and medium-sized enterprises (SMEs).

At this size buyers usually expect evidence of similar work, appropriate insurance and stable finances, so smaller firms often bid as part of a consortium or as a subcontractor.

Public buyers in the UK must treat suppliers equally and explain how bids will be scored, so the selection and award criteria in the tender documents are the best guide to whether this opportunity is worth your time.

Before deciding to bid, read the full notice and any attached documents: they set out the exact requirements, selection criteria and how bids will be scored.

Key dates

The notice was published on 6 November 2026.

This is a pipeline notice: the buyer intends to run a procurement and expects it to open around November 2026. No bids can be submitted yet.

Pipeline notices give suppliers time to prepare. Many invite early market engagement — a questionnaire, a supplier day or a request for information — and taking part helps the buyer shape a tender that suits firms like yours. When the buyer publishes the full tender notice, it will appear on Ktenders with its closing date.

Dates in pipeline notices are estimates and often move, so register on the buyer's portal and check the official notice for updates rather than relying on the expected month alone.

Original notice text

• Application of the following mastic asphalt product: Permatrack Bridge Surfacing + 40% 4/10mm Agg (MA 10 10/20) with 6mm Pre-coated chippings 68PSV at a rate of spread of 6.0 to 7.5 kg/m2

• Application to achieve a mean thickness of an average of 35mm +/- 2mm locally

• Surfacing to achieve the following standard:

o Surface regularity taken on 75m lengths, the pavement surface shall be measured transversely for irregularities at 10m intervals by a 3m long straight-edge in accordance with BS8420 placed at right angles to the centre line of the road. The maximum allowable difference between the surface and the underside of the straight-edge, when placed parallel with, or at right angles to, the centre line of the road shall be 3mm. For each 75m lengths, maximum permitted number of surface irregularities shall be 9 and 1 for irregularity limits of 4mm and 7mm respectively.

o Initial texture depth: 1.5mm (minimum) to 2.0mm (maximum) for average per 1,000m or complete carriageway lane where this is less than 1,000m. Initial texture depth: Average for a set of 10mm measurement shall be 1.2mm minimum. Interval and frequency of macrotexture measurements: 10 per 200m. Texture depth shall be measured by 10 individual measurements taken at approximately 5 m spacing along a diagonal line across the lane width. Initial surface macrotexture for bituminous surface courses shall be measured using the volumetric patch method described in BS EN 13036-1.

Additional information: This is an expression of interest for planned works.

All values expressed are estimated for budget purposes.

More construction & building tenders

All construction & building tenders →

More tenders in South West

SHWD Cleaning

South Hams District Council · South West · Estimated £150k · closes 25 Nov

5 days left

Retrofit Consultancy

Plymouth Community Homes · South West · Estimated £1m · closes 25 Nov

5 days left

All tenders in South West →

Closing soon

All live tenders by trade →