Closes today at 17:00
IT & software · South East Upcoming
Control Software
UK Atomic Energy Authority · Expected to open November 2026
What this tender is
UK Atomic Energy Authority is seeking suppliers for “Control Software”. It is classed as it & software goods, with delivery in South East.
In the buyer's own words: For this project We have 6 modules. Each module is made up of 3 stages. These stages are (1) an x-y stage, (2) a tilt goniometric stage, and (3) rotational stage. The links to these stages and the control box can be seen in the attached supporting document. The difference between our stages and the COTS stages is that each stage has a different motor to the COTS item (integrated 485 bus-type closed-loop stepper driver, IRS42E-K02, manual available). All modules are controlled via a single controller box. The controller box has power and user instructions from control software (via RS232 to…
The procedure and any lots are set out in full on the official notice.
The estimated value is £20k, as stated by the buyer; the final value can differ.
Ktenders places each notice in a trade from the classification code the buyer chose and in a region from the delivery location it gives, so if the scope looks different from the trade shown here, the official notice is the one to trust.
Who it suits
This tender is most relevant to it & software suppliers able to deliver in South East.
At this size it is within reach of many small suppliers, though the buyer may still ask for relevant experience, insurance and financial standing.
Public buyers in the UK must treat suppliers equally and explain how bids will be scored, so the selection and award criteria in the tender documents are the best guide to whether this opportunity is worth your time.
Before deciding to bid, read the full notice and any attached documents: they set out the exact requirements, selection criteria and how bids will be scored.
Key dates
The notice was published on 11 September 2026.
This is a pipeline notice: the buyer intends to run a procurement and expects it to open around November 2026. No bids can be submitted yet.
Pipeline notices give suppliers time to prepare. Many invite early market engagement — a questionnaire, a supplier day or a request for information — and taking part helps the buyer shape a tender that suits firms like yours. When the buyer publishes the full tender notice, it will appear on Ktenders with its closing date.
Dates in pipeline notices are estimates and often move, so register on the buyer's portal and check the official notice for updates rather than relying on the expected month alone.
Original notice text
For this project We have 6 modules. Each module is made up of 3 stages. These stages are (1) an x-y stage, (2) a tilt goniometric stage, and (3) rotational stage. The links to these stages and the control box can be seen in the attached supporting document. The difference between our stages and the COTS stages is that each stage has a different motor to the COTS item (integrated 485 bus-type closed-loop stepper driver, IRS42E-K02, manual available). All modules are controlled via a single controller box. The controller box has power and user instructions from control software (via RS232 to USB cable) as inputs and has six output cables, each connected to one of the modules (RS232 to RS232). Each output cable is limited to 2m length. The cable from the controller connects to the bottom most stage of the module, that is the x-stage. The x-stage is then connected to the y-stage via a RS232 cable. The y-stage is connected to the goniometric stage via a RS232 cable. Finally, the goniometric stage is connected to the rotational stage via a RS232 cable. In this way, a controller with 6 outputs controls 6x4=24 motors. This setup is shown in the diagram and a picture of a single module is also provided on the attached supporting document. The control signal is sent via the control box to the desired module. If the control signal is not for the x-stage, the control signal is passed up the chain, and so on. We need the control software to interface with our existing hardware to control the 6 modules. The solution could interface with the existing control box, or alternatively provide a new controller to interface with the 6 modules. The requirements above are for the software/control of the 6 modules.
More it & software tenders
3 days left
4 days left
4 days left
4 days left
5 days left
More tenders in South East
Closes tomorrow at 12:00
Closes tomorrow at 23:59
2 days left
3 days left
3 days left
3 days left
Closing soon
Closes today at 12:00
Closes tomorrow at 16:00
3 days left
3 days left
3 days left
3 days left