Ktenders

Printing · UK-wide Closed

Printable Patient Identification Wristbands and Associated Accessories 2027

SUPPLY CHAIN COORDINATION LIMITED · Closed 11 November 2026

What this tender is

SUPPLY CHAIN COORDINATION LIMITED is seeking suppliers for “Printable Patient Identification Wristbands and Associated Accessories 2027”. It is classed as printing goods, with delivery across the UK or not tied to one region.

In the buyer's own words: Opportunity Non-exclusive framework agreement for the supply of Laser and Thermal printable wristbands, Thermal Printers- (Direct Thermal Printer, desktop or mobile model which are handheld and/or standalone) and associated accessories e.g. – battery packs, docking stations, printer ribbons, handheld electronic devices such as barcode scanners. Digital/contactless identification: Radio Frequency Identification (RFID) hardware and software, Near-field communication (NFC) products for access i.e. smart badges, ID badges in general etc, Biometric identification and card printers. This framework…

The tender is being run under an open procedure, so any supplier may bid.

The estimated value is £50m, as stated by the buyer; the final value can differ.

Ktenders places each notice in a trade from the classification code the buyer chose and in a region from the delivery location it gives, so if the scope looks different from the trade shown here, the official notice is the one to trust.

Who it suits

This tender is most relevant to printing suppliers able to deliver across the UK or not tied to one region.

At this size buyers usually expect evidence of similar work, appropriate insurance and stable finances, so smaller firms often bid as part of a consortium or as a subcontractor.

Public buyers in the UK must treat suppliers equally and explain how bids will be scored, so the selection and award criteria in the tender documents are the best guide to whether this opportunity is worth your time.

Before deciding to bid, read the full notice and any attached documents: they set out the exact requirements, selection criteria and how bids will be scored.

Key dates

The notice was published on 15 October 2026.

Responses are due by 15:00 UK time on 11 November 2026, and that deadline has now passed.

Most buyers set a cut-off for clarification questions a few days before the deadline, and the answers are usually shared with every bidder on the buyer's portal.

Deadlines on public tenders are strict: late submissions are normally rejected, so allow time for clarification questions and for uploading your response on the buyer's portal.

Original notice text

Opportunity

Non-exclusive framework agreement for the supply of Laser and Thermal printable wristbands, Thermal Printers- (Direct Thermal Printer, desktop or mobile model which are handheld and/or standalone) and associated accessories e.g. – battery packs, docking stations, printer ribbons, handheld electronic devices such as barcode scanners. Digital/contactless identification: Radio Frequency Identification (RFID) hardware and software, Near-field communication (NFC) products for access i.e. smart badges, ID badges in general etc, Biometric identification and card printers.

This framework agreement is for a total of 48 months. Precise quantities are unknown. It is anticipated that the expenditure will be in the region of GBP £40,000,000 - £50,000,000 Ex VAT / £48,000,000 - £60,000,000 Inc VAT throughout the duration of this framework agreement. However, this is approximate only and the values may vary depending on the requirements of those bodies purchasing under the framework agreement.

Requirements

The following certification will be a requirement of the upcoming tender exercise and Applicants may be required to include evidence of this within their tender submission:

- Employer's Liability Insurance cover of £5m per claim in the name of the Applicant

- Public Liability Insurance cover of £5m per claim in the name of the Applicant

- Product Liability Insurance cover in the name of the Applicant of £5m per claim or £5m per claim and in the annual aggregate

- ISO9001:2015 accredited by the United Kingdom Accreditation Service (or international equivalent) to cover all segments of the Applicant's and the product's supply chain. This should include, but not be limited to, manufacturing, storage and distribution.

- Declaration of Conformity and UKCA/CE Certification to demonstrate compliance to Medical Devices Regulations 2002 (if applicable).

PPN 009 'Tackling Modern Slavery in Government Supply Chains'

In February 2025 PPN 009 "Tackling Modern Slavery in Government Supply Chains" was published. This PPN specifically calls out the NHS as being in scope. The PPN requires the risk of Modern Slavery to be identified for each Procurement activity, and appropriate due diligence conducted to manage these risks.

Risk Profiling and Methodology

Each NHS Supply Chain procurement, including the forthcoming procurement for Patient Identification has been assessed, using a standard methodology. The methodology has been developed using a database of risk, mapped to E-class codes. This has been mapped to the procurement activity to assess the level of risk associated with that activity, prior to knowing which specific suppliers and value chains are going to be used. Based on that risk the following tools will be applied to the procurement to understand the specific risk in the proposed supply chains.

Low Risk - Modern Slavery Assessment Tool

Medium Risk - Modern Slavery Assessment Tool + Evidence Review

High Risk - Modern Slavery Assessment Tool + Evidence Review +

3rd Party Audit

This risk profiling has been conducted on Patient Identification products in the pre-market phase and has determined a medium risk.

PPN 009 Tender Submission Requirements

Confirmation (yes/no) that The Modern Slavery Assessment Tool has been completed - will form part of the Selection Questionnaire of the tender. Results will be evaluated to establish Supplier risk.

Evidence Review on Modern Slavery - will be evaluated at tender submission. Results will be evaluated to establish Supplier risk.

Actions for Suppliers/Potential Suppliers to take now in the Pre-Market Stage

Ensure you have completed the Modern Slavery Assessment Tool (MSAT), you have a plan in place to act on the recommendations it makes, and you maintain the assessment annually.

Risks are based on the 6 factors set out in PPN 009.

The NHS has adopted PPN002 (taking account of Social Value), and therefore this future Framework Agreement will require suppliers to state what is their Social Value proposition which in turn will be made available to customers who utilise the Framework Agreement to aid their decision making when using the framework.

In addition, the NHS has adopted the Government's 'Taking Account of Carbon Reduction Plans' PPN006 requiring all suppliers with new contracts for goods, services and/or works irrespective of value to publish a carbon reduction plan for their direct emissions. Suppliers bidding on NHS Supply Chain tenders will also be required to submit an Evergreen Assessment.

For further information on NHS Supply Chain's application of PPN002 and PPN006 in addition to Evergreen Assessment and Horizon scanning requirements, a Sustainability & Social Value document will be issued to all suppliers who express interest in this Pre Market Engagement Notice along with the RFI. In any case, the Sustainability & Social Value document will also be made available with the full tender documents which will be the subject of separate market notice.

Suppliers are required to be registered on the Central Digital Platform by using the following link; Suppliers: How to register your organisation and first administrator on Find a Tender in three easy steps (HTML) - GOV.UK

The Framework Agreement between NHS Supply Chain and successful suppliers will reserve the right to purchase the same or similar supplies and/or services from suppliers not appointed to the Framework Agreement at its sole discretion.

As part of its pre-tender strategy, NHS Supply Chain would also like to engage with suppliers of these products via a Request for Information (RFI). If you would like to complete the Request for Information document in respect of the products which are the subject of this procurement then please follow the below instructions;

REGISTRATION

1. Use URL https://nhssupplychain.app.jaggaer.com// to access the NHS Supply Chain Procurement portal.

2. If not yet registered:

- Click on the 'Not Registered Yet' link to access the registration page.

- Complete the registration pages as guided by the mini guide found on the landing page.

PORTAL ACCESS

If registration has been completed:

- Login with URL https://nhssupplychain.app.jaggaer.com//

- Click on "ITT's Open to All Suppliers"

EXPRESSION OF INTEREST

- Find " ITT_2422" and click on the blue text. Select Express interest.

If you have any queries regarding the NHS Jaggaer E-procurement Portal or completing your expression of interest on this system, please contact our Support Helpdesk managed by Jaggaer on telephone: 0800 0698630 or by E-mail: help_uk@jaggaer.com

More printing tenders

All printing tenders →

More tenders in UK-wide

All tenders in UK-wide →

Closing soon

All live tenders by trade →